Universiti Pertahanan Nasional Malaysia

Faculty Member, Department of Mechanical Engineering

Professor Dr.

About

Aidy Ali is a Professor of mechanical Engineering at National Defence University of Malaysia (UPNM). He received his first degree in Mechanical Engineering from Universiti Putra Malaysia, 1999. He then pursued his Ph.D degree in Year 2003 research on Improving Fatigue Life of Aircraft Components By Using Surface Engineering at Sheffield University, UK. He was awarded a Ph.D degree in December 2005. His expertise is related to mechanical Fatigue and Fracture of materials, Failure assessment, Failure prevention analysis, Reliability engineering prediction and crash analysis.

Contact: aidyali@upnm.edu.my / saidynaidy@gmail.com


2012 Second International Conference on Electric Information and Control Engineering (ICEICE) 2012
Technical Program Committee
http://www.iceice.org/2012/committee.html

World research and Innovation Convention on Engineering and Technology (WRICET 2012) Kuala Lumpur Malaysia.
Technical Program Committee
http://www.feiic.org/CONF/WRICET2012/?page=advisors

ICEAI 2012 : 2012 International Congress on Engineering and Information, Friday-Monday, August 17-20, 2012
Shanghai, China
Committee
http://www.iceai.org/Index.asp?id=7


International Journal of Development and Sustainability
Editorial Board
http://isdsnet.com/ijds-aidy-ali/

International Journal of Engineering (IJE)
Editorial board
http://www.cscjournals.org/csc/journals/IJE/editorial_board.php?JCode=IJE

Open Journal of Safety Science and Technology (OJSST)
Editorial board
http://www.scirp.org/journal/ojsst/

International Journal of Automotive and Mechanical Engineering (IJAME)
Editorial Board
http://ijame.ump.edu.my/

International Journal of Control Engineering And Technology (IJCET)
Editorial Board
http://www.ijcet.org/EditorialBoard.aspx




ACTING REFEREE FOR

FEOFS 2010, 8TH International of Fracture and Strength of Solids, 2010
JMEP,  Journal of Materials Engineering and Performance , ASM, Springer. 2009, 2011
ASME, Conference Design engineering technical conference and computer and information in engineering conference IDETC09/CIE09,  2009
AMPT 2009, Advances in Materials and Processing Technologies ,2009
CARE 2009, Conference on Alternative and Renewable Energy, 2009
DSTC 2009, Defense and Security Technology Conference , 2009
IJAME 2009, International Journal of Automotive and Mechanical Engineering 2009, 2010
NCON-PGR 2009, National Conference on Post Graduate Research , 2009
NSPM 2009, National Symposium of Polymeric Materials, 2009
ASME, Journal of Materials Science and Technology, ASME Digital Library. 2007
FEIIC, Seminar on Engineering and Technology (SET 2006), 4-5th September 2006
WEC, World Engineering Congress Penang, August 2007
FEIIC, IJET, International Journal in Engineering and Technology 2006 ,2007, 2008,
IEM, Journal of  Institute of Engineer Malaysia 2008
Evaluator for Diploma programmed of Metallurgy Uni Malaysia Perlis UNIMAP 2008
PJST, Pertanika Journal Science and Technology, UPM
JFAE,  Journal of Food, Agriculture and Environment
PGRC'09, Post Graduate Research Conference 2009, UMP
IJMME, International Journal of Mechanical and Materials Engineering 2010, UM
CAME, Conference on Aerospace and Mechanical Engineering, 2010
CMTM, Conference on Manufacturing Technology and Management, 2010
IJEST, International Journal of Engineering, Science and Technology, 2010
IJVSS, International Journal of Vehicle Structures & System, 2010
IJN, International Journal of Nanoscience, 2011
IJVD, Internatinal Journal of Vehicle Design, Inderscience, 2011
MAPIM, Reviewer for Best Article MAPIM 2020, 2011
AJB, African Journal of Biotechnology, 2011
IJSI, International Journal of Structural Integrity, Emeralds.2011
JIT, Journal of Industrial Textiles, Sage Publication, 2011
BIORES, BioResources, Nc State Univeristy, 2011
ANGKASA, Panel reviewer for Publication award of Angkasa, 2011
MCP, Materials Chemistry and Physics, Elsevier, 2012
PREM, Probabilistic Engineering Mechanics, Elsevier, 2012
JCOM, Journal of Composites Part B, Elsevier 2012
JCM, Journal of Composite Materials, Sage, 2012

2006  Appointed as Lecturer (UPM)
2008  Promoted to Senior Lecturer(UPM)
2010  Promoted to Associate Professor (UPM)
2011  Appointed as Professor (UPNM)

RECENT PUBLICATIONS

2009

1) A. F. Golestaneh, Aidy Ali, S. V. Wong, F. Mustapha. M. Zadeh. Computational investigations of crack behavior in friction stir welding. Simulation: Transactions of The Society for Modeling and Simulation International. Vol 85 No. 1, p:45-59. 2009. Impact Factor: 0.783 (Thomson ISI)

2) M. Bayat, B. B. Sahari, M. Saleem, Aidy Ali and S. V. Wong . Thermoelastic Solution of a Functionally Graded Rotating Disk with Variable Thickness and bending Based on the First Order Shear Deformation Theory. Journal Thin Wall and Structure Vol 47 No. 5, p:568-582, 2009.Impact Factor: 0.85. (Thomson ISI)

3) A. F. Golestaneh ,Aidy Ali, M. Z. Mohammadi . Modelling the fatigue crack growth in friction stir welded joint of 2024-T351 al alloy Materials and Design  2009. Vol 30 p 2928-2937. Impact Factor: 1.518 (Thomson ISI)

4) A. F. Golestaneh ,Aidy Ali. Application of numerical method to investigation of fatigue crack behavior through the friction stir welding. Journal of Failure Analysis and Prevention, ASM International. Volume 9 (2) April 2009, pp: 147-158. (Scopus)

5) Afshar Reza, Aidy Ali, B. B. Sahari. Auto generation of center of gravity of tubular structure during crush deformation . International Journal of Computational Methods. Volume 6 (2) June. 2009. pp. 333-348. Impact Factor: 0.89 (Thomson ISI) 

6) Omar Suliman Zaroog, Aidy Ali, B. B. Sahari and Rizal Zahari. Modelling of Residual Stress Relaxation: A review. Pertanika Journal of Science and Technology. Volume 17 (2) 325-336  July 2009. (Scopus).

7) Nur Azida Che Lah, Aidy Ali, Napsiah Ismail. Characterisation of fusion welded joint: A review. Pertanika Journal of Science and Technology. Volume 17 (2) 289-298, July 2009. (Scopus).

8) M. Zadeh, Aidy Ali, A. F. Golestaneh, B. B. Sahari. Three dimensional simulation of fatigue crack growth in friction stir welded joints of 2024-T351 al alloy. Journal of scientific and industrial research. Volume 68 (9) 775-782, September 2009. Impact Factor: 0.47 (Thomson ISI)

9) M. Bayat, B. B. Sahari, , M. Saleem Aidy Ali, and S. V. Wong. Bending Analysis of a Functionally Graded Rotating Disk Based on the First Order Shear Deformation Theory , Applied Mathematical Modelling. Volume 33 (11) 4215-4230 November. 2009. Impact Factor: 0.931. (Thomson ISI)

10) Aidy Ali , Nur Azidah Che Lah ,Tan Soo Chin. Simulation of crack under compression load.  International Review of Mechanical Engineering . Vol  3 (2) March 2009 p:203-208 (Scopus)

11) Aidy Ali, M. Hosseini ,  B. B. Sahari. Fatigue Life Modeling for Elastomeric Materials: A Review International Review of Mechanical Engineering . Vol  3 (3) May 2009 p:332-338 (Scopus)

12) Aidy Ali, A. B. Sanuddin, Chan Wei Chieh, Reza Afshar. Fatigue simulation of elastomeric materials. International Review of Mechanical Engineering  Vol  3 (4) July  2009 p:461-466 (Scopus)

13) Aidy Ali, A. B. Sanuddin. Characterisation of ASTM A516 grade 7 fusion welded joints. International  Review of Mechanical Engineering  Vol  3 (5) November  2009 p:531-542 (Scopus)

14) Omar Suliman Zaroog, Aidy Ali, B. B. Sahari and Rizal Zahari.  Relaxation of residual stress. Part 2: cyclic relaxation. American Journal of Engineering and Applied Science. 2(4) 759-763, 2009 (Compendex)

15) M. M. Noor, K. Kadirgama, Aidy Ali, M. M. Rahman, Z. Ghazalli.  Prediction of end-of-life strategies for household equipments using artificial intelligent. American Journal of Applied Sciences. . 6 (10): 1838-1844, Impact Factor 0.00 (Thomson ISI)

16) Omar Suliman Zaroog, Aidy Ali, B. B. Sahari and Rizal Zahari.  Relaxation of residual stress. Part 1: cyclic relaxation. Journal of Scientific and Industrial Research. Volume 68 (12) 1035-1037, December 2009. Impact Factor: 0.47 (Thomson ISI)

17) Aidy Ali, S. M. Sapuan, M. W. Brown . Studies on 2024-T351 Friction Stir Welding joints. International Journal of Nano System Technology, Electrical Engineering and Electronics Systems  Vol 2 No.1-2, p:39-46. 2009.

2010

1) Nur Azida Che Lah, Aidy Ali, Napsiah Ismail, Lim Poo Chai, Abdul Aziz . The effect of control shot peening on fusion welded joints. Materials and Design  Vol  31 p:312-324 2010. Impact Factor: 1.518 (Thomson ISI)

2) Abdul Rahim Abu Talib,  Aidy Ali, Mohamed A. Badie. Nur Azidah Che Lah, A. F. Golestaneh. Designing a hybrid, carbon/glass fiber-reinforced, epoxy composite automotive drive shaft . Materials and Design  Vol  31 p:514-521, 2010. Impact Factor: 1.518 (Thomson ISI)

3) Abdul Rahim Abu Talib,  Aidy Ali, G. Goudah, Nur Azidah Che Lah, A. F. Golestaneh. Development of composite based elliptic springs for automotive applications Materials and Design  Vol  31 p:475-484,  2010. Impact Factor: 1.518 (Thomson ISI)

4) Aidy Ali, A. B. Sanuddin, Saifuliwan Ezzeddin.The effect of ageing on arenga pinnata fibre reinforced epoxy composite Materials and Design Vol  31 p:3550-3554, 2010. Impact Factor: 1.518 (Thomson ISI)

5) M. M. Davoodi, S. M. Sapuan, D. Ahmad, Aidy Ali and A. Khalina, Mechanical Properties of hybrid kenaf/ glass reinforced epoxy composite in passengers car bumper beam.  Materials and Design, Vol 31 p: 4927-4932, 2010. IF: 1.518 (Thomson ISI)

6) Aidy Ali, Tung Chun Yun, Z. A. Zulkefli, Nuraini Abd Aziz,B. B. Sahari.  M. Zadeh, Strength Investigation of Thick Welded T- Joint using Finite Element Modelling, Defense Science Journal, Vol  60 (1) p:112-118, 2010. Impact Factor: 0.118 (Thomson ISI).

7) Aidy Ali, M. Hosseini, B. B. Sahari. A Review of Constitutive Models for Rubber-Like Materials.  American Journal of Engineering and Applied Science.  3 (1) 232-239, 2010 (Compendex)

8) Loh Siong Lee, Aidy Ali, A. B. Sanuddin, Reza Afshar. Simulation and experimental work on a thin-walled structure under crushing. Journal of failure analysis and prevention ASM international . 10, 143–151 (Scopus)

9) Aidy Ali, M. Hosseini, B. B. Sahari. Continuum damage mechanics modeling for fatigue life of elastomeric materials International Journal of Stuctural Integrity , Vol. 1 No. 1,
pp. 63-72. 2010. Emerald. (Cope)

10) C. W. Chieh, Aidy Ali, A. B. Sanuddin, Reza Afshar. Durability simulation of elastomeric materials using finite element method (FEM). Pertanika Journal of Science and Technology. Volume 18 (2) 441-449, July 2010. (Scopus).

11) M. Hosseini, Aidy Ali and B. B. Sahari. A review and comparison on some rubber elasticity models . Journal of Scientific and Industrial Research. , Vol. 67 No. 7,
pp. 495-500. 2010. Impact Factor: 0.47. (Thomson ISI)

12) Aidy Ali, M. Hosseini. B. B. Sahari. Heat aging effects on tensile properties of vulcanized natural rubber. International  Review of Mechanical Engineering  Vol  4 (4) May  2010 p:422-424 (Scopus).

13) R. S. Sidhu,  Aidy Ali, Fatigue Life of Automotive Rubber Jounce Bumper. Institute of Physic ( IOP) Conference Series Materials Science and Engineering open access journal. V 11, 2010, pp 012008 (Scopus)

14) M. S. A. Samad  , Aidy Ali.  Simulation work of fatigue Life Prediction of Rubber Automotive Components Institute of Physic ( IOP) Conference Series Materials Science and Engineering an open access journal. V 11, 2010, pp 012009, (Scopus)

15) Nurhaniza. M., M.K.A. Ariffin, Aidy Ali, F. Mustapha, Noraini. A. W.  Finite Element Analysis of Composites Materials for Aerospace Applications Institute of Physic ( IOP) Conference Series Materials Science and Engineering open access journal. V 11, 2010, pp 012010 (Scopus)

16) M.M.Davoodi, S.M. Sapuan, Aidy Ali,  D. Ahmad,  A. Khalina.  Thermoplastic Toughening in Hybrid Bio-composite Material for Car Bumper Beam Application Institute of Physic ( IOP) Conference Series Materials Science and Engineering open access journal. V 11, 2010, pp 012013 (Scopus)

17) Omar Suliman Zaroog, Aidy Ali, B. B. Sahari  and Rizal Zahari, Residual stress relaxation and surface hardness of 2024-T351 aluminum alloy. MP  Materials Testing V 52, 9. 2010.pp 632-639.  IF: 0.123 (Thomson ISI)

18) Omar Suliman Zaroog , Aidy Ali and B. B. Sahari. Rizal Zahari. Modeling of residual stress relaxation of 2024-T351 aluminum alloy.  International Journal of Fatigue, Vol 33, 2010 , p:279-285. IF: 1.602 (Thomson ISI)


2011

1) Z. N. Ismarrubie, Aidy Ali, T. Satake and M. Sugano.Influence of Microstructures on Fatigue Damage Mechanisms in Ti-15-3 Alloy. Materials and Design Vol 32 p: 1456-1461. IF: 1.518.  2011. (Thomson ISI)

2) M. Bernard, A. Khalina, Aidy Ali, R. Janius,  M. Faizal, K. S. Hasnah and A.B. Sanuddin. The effect of processing parameters on the mechanical properties of kenaf fiber plastic composite . Materials and Design 2011. Vol 32 p: 1039-1043. IF: 1.518 (Thomson ISI)

3) M. S. A. Samad,  Aidy Ali, R. S. Sidhu. Durability of automotive jounce bumper. Materials and Design 2011. Vol 32 p: 1001-1005 IF: 1.518 (Thomson ISI)

4) Omar Suliman Zaroog , Aidy Ali and B. B. Sahari. Rizal Zahari. Modeling of residual stress relaxation of 2024-T351 aluminum alloy International Journal of Fatigue, Vol 33, 2011 , p:279-285. IF: 1.602 (Thomson ISI) 

5) Reza Afshar, Aidy Ali, B. B. Sahari  and M. Bayat . Auto adjust masses of automotive structures with desired centre of gravity. Key Engineering Materials . Vol. 462-463, 2010 , p:812-816, Impact Factor; IF 0.224 (Thomson ISI)

6) K. A. Mohammad, Aidy Ali, A. Oshkour and B. B. Sahari, S. Abdullah. Investigation of creep fatigue crack propagation in aluminium tube Key Engineering Materials . Vol. 462-463, 2011 , p:541-546, Impact Factor; IF 0.224 (Thomson ISI)

7) M. S. A. Samad, Aidy Ali, and M. K. A. Ariffin, Life prediction of rubber automotive components using finite element method Key Engineering Materials . Vol. 462-463, 2011 , p:535-540., Impact Factor; IF 0.224 (Thomson ISI)

8) R. S. Sidhu, Aidy Ali, and M. R. Hassan ,Experimetal determination of fatigue life of automotive jounce bumper Key Engineering Materials . Vol. 462-463, 2011 , p: 634-638, Impact Factor; IF 0.224 (Thomson ISI)

9) Omar Suliman Zaroog , Aidy Ali, B. B. Sahari and Rizal Zahari, Microhardness and residual stress relaxation of 2024 T351 aluminum alloy Key Engineering Materials .Vol. 462-463, 2011 , p:343-348, Impact Factor; IF 0.224 (Thomson ISI)

10) A. F. Golestaneh, Aidy Ali, and M. Bayat.  Analytical and numerical investigation of fatigue crack growth in aluminum alloys Key Engineering Materials . Vol. 462-463, 2011 , p:1050-1055, Impact Factor; IF 0.224 (Thomson ISI)

11) A. F. Golestaneh, Aidy Ali, and M. Bayat, Experimental and analytical studies of fatigue crack growth in peened after skimmed friction stir welded joint of 2024-t351 al alloy Key Engineering Materials . Vol. 462-463, 2011 , p:1212-1217, Impact Factor; IF 0.224 (Thomson ISI)

12) S. A. Ibraheem, Aidy Ali, A. Khalina. Development of Green Insulation Boards From Kenaf Fibres. Part 1: Development and Characterization of Mechanical Properties Key Engineering Materials . Vol. 462-463, 2011 , p:1343-1348, Impact Factor; IF 0.224 (Thomson ISI)

13) S. A. Ibraheem , Aidy Ali , A. Khalina. Development of Green Insulation Boards From Kenaf Fibres. Part 2: Characterizations of Thermal and Water Absorption 
Key Engineering Materials . Vol. 462-463, 2011 , p:1331-1336, Impact Factor; IF 0.224 (Thomson ISI)

14) Omar Suliman Zaroog, Aidy Ali , and B. B. Sahari . Prediction of Residual Stress Relaxation of Shot Peened 2024-T351 Aluminum Alloy Part 1. Key Engineering Materials Vol. 462-463, 2011 , p:1355-1360, Impact Factor; IF 0.224 (Thomson ISI)

15) A Omar Suliman Zaroog , Aidy Ali , and B. B. Sahari . Prediction of Residual Stress Relaxation of Shot Peened 2024-T351 Aluminum Alloy Part 2.  Key Engineering Materials Vol. 462-463, 2011 , p:1349-1354, Impact Factor; IF 0.224 (Thomson ISI)

16) K. S. Hasnah, A. Khalina, Aidy Ali, S. Jamaliah. The Effect of Eva on Composite that Made of PP Nanoclay.  Key Engineering Materials . Vol. 462-463, 2011 , p:925-930, Impact Factor; IF 0.224 (Thomson ISI)

17) M. J. Suriani, Aidy Ali, S. M. Sapuan,  and A. Khalina . Non-destructive Techniques (NDT) in Composite Materials. Key Engineering Materials . Vol. 462-463, 2011 , p:918-924, Impact Factor; IF 0.224 (Thomson ISI)

18) Omar Suliman Zaroog , Aidy Ali, and B. B. Sahari. Characterization of Shot Peened 2024-T351 Aluminum Alloy Key Engineering Materials . Vol. 462-463, 2011 , p:912-917, Impact Factor; IF 0.224 (Thomson ISI)

19)  Zainab Shaker Radif, Aidy Ali. Fracture toughness of Kenaf mat reinforced polyester composite. Pertanika Journal of Science and Technology. Volume 19 (1) 167-177, Jan 2011. (Scopus).

20) Nur Azida Che Lah, Aidy Ali. Fatigue Strength Improvement of MIG-Welded Joint by Shot Peening.  Institute of Physic ( IOP) Conference Series Materials Science and Engineering open access journal. V 17, 2011, pp 012001 (Scopus)

21) A. A. Oshkour, B. B. Sahari  and Aidy Ali. Variation of Stress Intensity Factor through the Thickness of Plate.  Institute of Physic ( IOP) Conference Series Materials Science and Engineering open access journal. V 17, 2011, pp 012004 (Scopus)

22) S. Eslamian, B. B. Sahari, Aidy Ali, El-Sadiq Mahdi, A. M. Hamouda. Microscopic Study OF 5083-H321 Aluminium Alloy Under Fretting Fatigue Condition.  Institute of Physic (IOP) Conference Series Materials Science and Engineering open access journal. V 17, 2011, pp 012026 (Scopus)

23) Reza Afshar, Aidy Ali and B. B. Sahari. Axial Crush of the Tubular structure with various Cee-shaped cross-sections Institute of Physic (IOP) Conference Series Materials Science and Engineering open access journal. V 17, 2011, pp 012039 (Scopus)

24) S.C. Ng, N. Ismail, Aidy Ali, B. B. Sahari, J.M. Yusof, B. W. Chu. Non-Destructive Inspection of Multi-Layered Composites Using Ultrasonic Signal Processing Institute of Physic (IOP) Conference Series Materials Science and Engineering open access journal. V 17, 2011, pp 012045 (Scopus)

25) Zahra Dashtizadeh, Aidy Ali, A.Khalina. A Review of Non-Destructive Thermography Techniques Toward Structural Integrity of Bio-composites Key Engineering Materials . Vol. 471-472, 2011 , p:103-108, Impact Factor; IF 0.224 (Thomson ISI)

26) S. A. Ibraheem , Aidy Ali, A. Khalina. Development of green insulation boards from kenaf fibres and polyurethane . Polymer-Plastic Technology and Engineering  2011. V 50. (6) Pages 613 - 621.  IF: 0.420 (Thomson ISI)

27) Aidy Ali, Z. R. Shaker R, A. Khalina. S. M. Sapuan. Development of a green anti ballistic board from ramie fiber . Polymer-Plastic Technology and Engineering  2011. V 50. (6) Pages 622 - 634.  IF: 0.420 (Thomson ISI)

28) Zainab Shaker Radif, Aidy Ali, Khalina Abdan. Development of a green combat armor from rame-kevlar-polyester composite. Pertanika Journal of Science and Technology. Volume 19 (2) Pages 339-348, 2011. (Scopus).

29) H. K. Alsultaney, M. K. A. Ariffin, B.T.H.T. Baharudin, Aidy Ali, F. Mustapha. Development of combinatorial optimisation for cutting tool path strategy . Pertanika Journal of Science and Technology. Volume 19 (2) August, 2011. (Scopus).

30) A. H. Abdullah, Z. A. Zulkefli, Aidy Ali , A study  of  acoustics and speech intelligibility quality of prayer house. International Journal of Automotive and Mechanical Engineering. 2011. Accepted Inpress

31) A. Khalina, Aidy Ali, H. Jalaluddin, , M. Z. Hasniza, W. H. W. M. Haniffah, M. Y. Yusri and M. G. Shuriati. Feasibility study of natural fiber reinforced plastic composite processed by injection molding technique.Materialpruefung/Materials Testing 2011. V 53, 4.pp 229-232 IF: 0.123 (Thomson ISI)

32) M. Bernard, A. Khalina, Aidy Ali, R. Janius, M. Faizal and K. S. Hasnah. Optimisation of compression moulding temperature for polypropylene materials. Materialpruefung/Materials Testing 2011. 53, 5,pp 280-284 IF: 0.123 (Thomson ISI)

33) K. S. Hasnah, A. Khalina, Aidy Ali, M. Bernard, S. Jamaliah, and W. Y. W. M. Zin. Kenaf performance in PP/EVA/clay biocomposite. Materialpruefung/Materials Testing, 2011. V 53, 6 .pp 364-368. IF: 0.123 (Thomson ISI)

34) A. H. Abdullah, A. Khalina and Aidy Ali. Effect of fiber volume fraction on unidirectional Kenaf/Epoxy Composite: The transition region. Polymer-Plastic Technology and Engineering  2011. IF: 0.420 (Thomson ISI) Inpress

35) M. Davoodi, S. M. Sapuan, Aidy Ali, A. Khalina and Desa Ahmad. Concepts Selection of Car Bumper Beam with Developed Hybrid  Bio-Composite Material. Materials and Design 2011. Vol 32 p: 4857-4865. IF: 1.518 (Thomson ISI)

36) L. H. Abbud, A.R. Abu Talib, Aidy Ali, F. Mustapha,  Mechanical properties of interlaminer Kevlar29 and Al2O3 powder/epoxy composite plates using an analytical approach. Scientific Research Essays. 2011.  VOL 6 (21) pp: 4455-4463. IF: 0.445 (Thomson ISI)

37) Nurhaniza Muhammad, M. K. A. Arifin, Aidy Ali, M. Mustapha. Detection analysis of the thin-web workpiece structure using similarity concept. Advanced Materials Research. 2011. Vol. 337 pp: 479-488. (Thomson ISI)

38) M. S. Salwani, Aidy Ali, B. B. Sahari, Nuraini A. A. Crash of automotive side member subjected to oblique loading. International Journal of the Physical Sciences Vol 6 (31)  pp:7125-7131. 2011. IF: 0.54 (Thomson ISI)

39) Ahmed H. Alwathaf, Aidy Ali, M. S. Jaafar, Mohd. A. Algorafi.  Stress-Strain Modelling of Reinforced Concrete Membrane Structures. International Journal of the Physical Sciences Vol 6 (30) pp:6820-6828. 2011. IF: 0.54 (Thomson ISI)

2012

1) M.M. Davoodi, S. M. Sapuan, D. Ahmad, Aidy Ali, A. Khalina, M. Janoobi. Effect of polybutylene terephtalate (PBT) on impact property improvement of hybrid kenaf/glass epoxy composite. Materials Letters.2012. V 67, pp 5-7.. IF: 2.117 (Thomson ISI)

2) L. H. Abbud, A.R. Abu Talib, Aidy Ali,  F. Mustapha, Predicting a Ballistic Impact performance of Kevlar-29 and Al2O3 powder/Epoxy Targets under High Velocity Impact.  Materials and Design, Vol 35 p:12-19.2012. IF: 1.518 (Thomson ISI)

3) Mai Nursherida J, B.B. Sahari, Aidy Ali, Nuraini. A. A. Performance of Automotive Composite Bumper Beams and Hood Subjected to Frontal Impacts. Materials Testing V 54, 1. 2012.pp 19-25. 2012. IF: 0.123 (Thomson ISI)

4) Suriani Mat Jusoh, Aidy Ali, S M Sapuan and A. Khalina . Aspect of fatigue analysis of composites materials. Pertanika Journal of Science and Technology, Vol xx, 2012 , p:xx.  (Scopus) Accepted

5) Aidy Ali ,L. H. Abbud, A.R. Abu Talib, , F. Mustapha, Impact Resistance of Armor Composite Made of Kevlar29 and Al2O3 Powder. Materials Testing V 54, 3. 2012.pp 169-174. 2012. IF: 0.123 (Thomson ISI)

6) M. M. Davoodi, S.M. Sapuan, Aidy Ali, D. Ahmad. Effect of the strengthened ribs in hybrid toughened Kenaf/Glass epoxy composites bumper beam. Life Science Journal. 2012. V 9, 1.pp 210-213. IF: 0.158 (Thomson ISI)

7) M.M.Davoodi1, S.M. Sapuan, A. Aidy, N.A. Abu Osman,  A.A. Oshkour, W.A.B Wan Abas .Development Process of New Bumper Beam for Passenger Car: A Review. Materials and Design 2012. Vol xx p:12-19.. IF: 1.694 (Thomson ISI) Inpress

8) A. Azim, Aidy Ali, B.B. Sahari, A.A. Nuraini, A.A. Faieza, Tuan Hafandi Tuan Ismail, M.S. Salwani, J.M. Nursherida, M.S. Nabilah, S.S. Aini, M. Shahril, M.H. Norhidayah, .Performance of Aluminium Alloy Side Door Subjected to Pole Impact, Applied Mechanics and Meterials  2012. V 165. pp 280-284. (CPCI ISI)

9) J. M. Nursherida, A.A. Nuraini, B.B. Sahari, Aidy Ali, , A.A. Faieza, Tuan Hafandi Tuan Ismail, Azim Azizi, M.S. Salwani, M.S. Nabilah. S.S. Aini, M. Shahril , M.H. Norhidayah. Performance of hood system and head Injury Criteria Subjected to Frontal Impacts, Applied Mechanics and Meterials  2012. V 165. pp 270-274. (CPCI ISI)

10) S.S. Aini, B.B. Sahari, Aidy Ali, A.A. Nuraini, A.A. Faieza, Tuan Hafandi Tuan Ismail, M. Shahril, M.S. Nabilah, M.S. Salwani , J.M. Nursherida, A. Azim, M.H. Norhidayah, Introducing Fatigue Contour Plot in LS-Pre Post LSDYNA Finite Element Crash Simulation Software Applied Mechanics and Meterials  2012. V 165. pp 275-279. (CPCI ISI)

11) M.S. Salwani, Aidy Ali, B.B. Sahari, A.A. Nuraini, A.A. Faieza, Tuan Hafandi Tuan Ismail, J. M. Nursherida , Azim Azizi, , M.S. Nabila, S.S. Aini, M. Shahril , M.H. Norhidayah, Analysis on Impact Performance of Aluminium Automotive Side Member
Applied Mechanics and Meterials  2012. V 165. pp 209-213. (CPCI ISI)

12) J. M. Nursherida, A.A. Nuraini, B.B. Sahari, Aidy Ali, , A.A. Faieza, Tuan Hafandi Tuan Ismail, Azim Azizi, M.S. Salwani, M.S. Nabilah. S.S. Aini, M. Shahril , M.H. Norhidayah. Determination of Leg Injury Cirteria Subjected to Frontal Impacts, Applied Mechanics and Meterials  2012. V 165. pp 265-269. (CPCI ISI)